Saturday, April 07, 2018

MikroTik RouterBOARD Cloud Core Router CCR1009-7G-1C-1S+
MikroTik RouterBOARD Cloud Core Router CCR1009-7G-1C-1S+
The MikroTik Cloud Core CCR1009-7G-1S-1S+ when unboxing, comes in a 1U rackmount case with 7x Gigabit ethernet ports and one SFP cage, with a 1Gbit software interface. This is the first Mikrotik Routerboard device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP module.

If you are looking a router that will send many packets per second on an affordable budget then- Cloud Core Router with 9 cores is your best choice.

No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port - a single 1Gbit software interface that has two hardware interfaces - a SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. Port also allows to switch from one to another interface from software, or in event of disconnect, providing new, unique hardware fail-over feature.

100Mbps SFP support - this is the first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput - due to how ports are connected to CPU, new CCR1009 models can achieve higher theoretical throughput.

The mikrotik CCR1009-8G-1S-1S+ has its 2GB of DDR3 800MHz RAM soldered directly to the motherboard and cannot be expanded.

New generation CPU

9 core CPU

1.2GHz clock per core

12 Mbytes total on-chip cache

State of the art TILE GX architecture

High performance

8 mpps standard forwarding

24 mpps fastpath forwarding (wire speed for all ports)

Up to16Gbit/s throughput.

See Full Specifications Below:

Product code CCR1009-7G-1C-1S+

CPU nominal frequency 1.2 GHz

CPU core count 9

Size of RAM 2 GB

10/100/1000 Ethernet ports 7

Number of USB ports 1

Power Jack 3

Supported input voltage 15 V - 57 V

PoE in Yes

Voltage Monitor Yes

CPU temperature monitor Yes

PCB temperature monitor Yes

Dimensions 444x175x47mm

Operating System RouterOS

License level 6

Current Monitor Yes

CPU TLR4-00980CH-10CE-A3b

Max Power consumption 34W

SFP+ ports 1

USB slot type microUSB type AB

USB Power Reset Yes

Serial port RS232

Storage type NAND

Storage size 128 MB

CPU Threads count 9

A simple guide to when next your buying a router.

No comments:

Post a Comment